OKUMA

REEL SPIN ITX 7+1BB ALUM SPOOL

Serves: {{selectedOption.serves}}

{{packitem.quantity}} x {{ packitem.item.name }}

Quantity

- +

Stock Notification

Name

Email Address

Name

Message

Find a Dealer

SKU #

Product as part of a combo

The ITX Carbon spinning reels are a light weight, compact bodied spinning reel constructed of rigid C-40X long strand carbon fiber. This C-40X process is 25% stronger than standard graphite reels and is featured in the body, side plates and rotor of the ITX making it perfect for your freshwater and light inshore needs.

The ITX features a multi-disc, carbon fiber drag system with Okuma’s Hydro Block Gasket, keeping water out and your drag running smooth. The 7HPG +1RB High Performance, grease packed bearings keep the reel running smoothly along with the precision machine cut brass pinion gear. And the Quick-Set anti reverse roller bearing stops the reel on a dime. ITX reels are designed with Okuma’s CFR, Cyclonic Flow Rotor technology which sweeps water away from the two-toned anodized machined aluminum spool. The 3,000 and 4,000 size reels all come standard with 6.0:1 high speed gearing. One of the key features to the new ITX Carbon reels is the machined aluminum, screw in handle design keeping your handle running tight with no more loosening screws.

Light weight and rigid C-40X carbon body, sideplates and rotor

Multi-disc, carbon fiber drag system with Hydro Block gasket

7HPB + 1RB High Performance, grease packed bearings

Quick-Set anti-reverse roller bearing

CFR: Cyclonic Flow Rotor Technology

Machined aluminum screw in handle design

High speed 6.0:1 gear ratio on all models

Precision machine cut brass pinion gear

Machined aluminum, 2-tone anodized aluminum spool

Model	Gear ratio	Bearings	Weight(g)	Line retrieve(cm)	Max Drag Force(kg)	Mono line capacity(mm)
ITX- 1000H	5.8:1	7+1	200	73	3	0.15/250, 0.20/140, 0.25/90
ITX-3000H	6.0:1	7HPB +1RB	249	68.7	8	0.20/300, 0.25/200, 0.30/30
ITX-4000H	6.0:1	7HPB+1RB	304	76.3	10	0.25/260, 0.30/180, 0.35/130

Lightweight and rigid C-40X carbon body, sideplates and rotor
Multi-disc, carbon fiber drag system with Hydro Block gasket
7HPB+1RB High Performance, grease packed bearings
Quick-Set anti-reverse roller bearing
Slow oscillation system for improved line lay
CFR: Cyclonic Flow Rotor Technology
Machined aluminum screw in handle design
TGT Grip: Traction Grip Technology
High speed on all models
Precision machine cut brass pinion gear
Machined aluminum, 2-tone anodized aluminum spool
Heavy duty, solid aluminum bail wire
RESII: Computer balanced Rotor Equalization System

Lightweight and rigid C-40X carbon body, sideplates and rotor

The lightweight and rigid C-40X long strand carbon fiber is featured in the body, side plates and rotor give and provide extra strength where it is needed the most.

TORSION CONTROL ARMOR® (TCA™)

The one-piece TCA™ design was built using Okuma C-40X carbon fiber technology and made with a double arm design. Compared to traditional single side designs, TCA™’s double arm offers higher torsion and flex resistance under heavy pressure for improved strength. This not only makes the reel lighter but also extremely rigid ensuring the internal parts stays in perfect alignment.

Cyclonic Flow Rotor (CFR)

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

Machined aluminum screw in handle design with TGT grip

The machined aluminum handle screws directly into the reel for the ultimate in a direct and secure connection. (TGT: Traction Grip Technology)

Multi-disc, carbon fiber drag system

Housed in the spool is the multi-disc, carbon fiber drag system with hydro-block gasket keeping your drags dry and running smooth.

7HPB+1RB High performance bearing

The 7 HPB+1RB high performance ball bearing system keeps the reel running smoothly in freshwater and light inshore applications.

Slow Oscillation System

Okuma's Slow Oscillation System on its spinning reels creates a nice tight, even line lay. This even line lay helps to keep the line flat and helps you to get longer, more accurate casts.

OKUMA REEL SPIN ITX 7+1BB ALUM SPOOL Reviews

Write Review

There are not yet any reviews on this product.